Discussion:
[Numpy-discussion] AppVeyor
Charles R Harris
2015-12-20 17:31:45 UTC
Permalink
Hi All,

Just checking if someone has already registered numpy on appveyor. If not,
I intend to rename my personal account. Note that as AFAICT, someone has to
be the admin for appveyor, and that someone, like everyone else, can only
have one account on appveyor. Other folks with accounts can be added as
collaborators, but they cannot belong to the numpy account. Or something.
Reading the appveyor documentation, such as it is, is like driving through
a heavy fog and the user interface is lacking. I would be happy for any
input here.

Chuck
Ralf Gommers
2015-12-20 17:48:07 UTC
Permalink
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor. If not,
I intend to rename my personal account. Note that as AFAICT, someone has to
be the admin for appveyor, and that someone, like everyone else, can only
have one account on appveyor.
Don't think so, unless they changed something very recently. I have already
registered 2 accounts (my own, and pywavelets).
Post by Charles R Harris
Other folks with accounts can be added as collaborators, but they cannot
belong to the numpy account. Or something. Reading the appveyor
documentation, such as it is, is like driving through a heavy fog and the
user interface is lacking. I would be happy for any input here.
Yeah, it's not the most friendly interface. I think you can just go to
https://ci.appveyor.com/signup and register an account "numpy" with your
email and it probably won't complain that you already have charris
registered with the same email account attached.

Ralf
Charles R Harris
2015-12-20 18:08:46 UTC
Permalink
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor. If
not, I intend to rename my personal account. Note that as AFAICT, someone
has to be the admin for appveyor, and that someone, like everyone else, can
only have one account on appveyor.
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
I get

AppVeyor user with specified email already exists.

This seems to have been the case since at least mid summer. When did you
register the accounts?
Post by Charles R Harris
Other folks with accounts can be added as collaborators, but they cannot
belong to the numpy account. Or something. Reading the appveyor
documentation, such as it is, is like driving through a heavy fog and the
user interface is lacking. I would be happy for any input here.
Yeah, it's not the most friendly interface. I think you can just go to
https://ci.appveyor.com/signup and register an account "numpy" with your
email and it probably won't complain that you already have charris
registered with the same email account attached.
Ralf
_______________________________________________
NumPy-Discussion mailing list
https://mail.scipy.org/mailman/listinfo/numpy-discussion
Charles R Harris
2015-12-20 19:23:01 UTC
Permalink
On Sun, Dec 20, 2015 at 11:08 AM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor. If
not, I intend to rename my personal account. Note that as AFAICT, someone
has to be the admin for appveyor, and that someone, like everyone else, can
only have one account on appveyor.
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
I get
AppVeyor user with specified email already exists.
This seems to have been the case since at least mid summer. When did you
register the accounts?
Did you use different email addresses?

<snip>

Chuck
Ralf Gommers
2015-12-20 20:23:33 UTC
Permalink
Post by Charles R Harris
On Sun, Dec 20, 2015 at 11:08 AM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor. If
not, I intend to rename my personal account. Note that as AFAICT, someone
has to be the admin for appveyor, and that someone, like everyone else, can
only have one account on appveyor.
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
I get
AppVeyor user with specified email already exists.
This seems to have been the case since at least mid summer. When did you
register the accounts?
Did you use different email addresses?
No, it looks like you can sign in with your Github login, and with email +
password. Those can be different.

Ralf
Nathaniel Smith
2015-12-20 20:34:35 UTC
Permalink
On Sun, Dec 20, 2015 at 8:23 PM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 11:08 AM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor. If
not, I intend to rename my personal account. Note that as AFAICT, someone
has to be the admin for appveyor, and that someone, like everyone else, can
only have one account on appveyor.
Post by Charles R Harris
Post by Charles R Harris
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
Post by Charles R Harris
Post by Charles R Harris
I get
AppVeyor user with specified email already exists.
This seems to have been the case since at least mid summer. When did
you register the accounts?
Post by Charles R Harris
Did you use different email addresses?
No, it looks like you can sign in with your Github login, and with email
+ password. Those can be different.

I wonder if there's a better way to organize these kinds of things in
general? It's probably not a big deal, but it can eventually make a mess
sometimes if there's only one person who has access to some piece of
critical infrastructure, and then years later they aren't available at some
point or no one knows who to ask. If we had the steering council mailing
list set up we could use that for the mailing address, but of course atm we
don't. Or we could make a scratch email account somewhere
(numpy-***@gmail) and pass around the login credentials. Or ask Leah
at numfocus to make an account and then add us as admins. Or maybe this is
overthinking it and we should just use some hack and move on :-)

-n
Ralf Gommers
2015-12-20 20:45:16 UTC
Permalink
On Sun, Dec 20, 2015 at 8:23 PM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 11:08 AM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor.
If not, I intend to rename my personal account. Note that as AFAICT,
someone has to be the admin for appveyor, and that someone, like everyone
else, can only have one account on appveyor.
Post by Charles R Harris
Post by Charles R Harris
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
Post by Charles R Harris
Post by Charles R Harris
I get
AppVeyor user with specified email already exists.
This seems to have been the case since at least mid summer. When did
you register the accounts?
Post by Charles R Harris
Did you use different email addresses?
No, it looks like you can sign in with your Github login, and with email
+ password. Those can be different.
I wonder if there's a better way to organize these kinds of things in
general? It's probably not a big deal, but it can eventually make a mess
sometimes if there's only one person who has access to some piece of
critical infrastructure, and then years later they aren't available at some
point or no one knows who to ask. If we had the steering council mailing
list set up we could use that for the mailing address, but of course atm we
don't. Or we could make a scratch email account somewhere
at numfocus to make an account and then add us as admins. Or maybe this is
overthinking it and we should just use some hack and move on :-)
I like the mailing list idea. Why not set up the steering council list now?
It's not like that's a lot of work.
Asking Numfocus doesn't make sense for this.

Ralf
Charles R Harris
2015-12-20 20:56:15 UTC
Permalink
Post by Ralf Gommers
On Sun, Dec 20, 2015 at 8:23 PM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 11:08 AM, Charles R Harris <
On Sun, Dec 20, 2015 at 10:48 AM, Ralf Gommers <
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor.
If not, I intend to rename my personal account. Note that as AFAICT,
someone has to be the admin for appveyor, and that someone, like everyone
else, can only have one account on appveyor.
Post by Charles R Harris
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
Post by Charles R Harris
I get
AppVeyor user with specified email already exists.
This seems to have been the case since at least mid summer. When did
you register the accounts?
Post by Charles R Harris
Did you use different email addresses?
No, it looks like you can sign in with your Github login, and with
email + password. Those can be different.
I wonder if there's a better way to organize these kinds of things in
general? It's probably not a big deal, but it can eventually make a mess
sometimes if there's only one person who has access to some piece of
critical infrastructure, and then years later they aren't available at some
point or no one knows who to ask. If we had the steering council mailing
list set up we could use that for the mailing address, but of course atm we
don't. Or we could make a scratch email account somewhere
Leah at numfocus to make an account and then add us as admins. Or maybe
this is overthinking it and we should just use some hack and move on :-)
I like the mailing list idea. Why not set up the steering council list
now? It's not like that's a lot of work.
Asking Numfocus doesn't make sense for this.
Appveyor recommends the name/mailing address/password registration for
projects. Do we have an office vault for the password ;)

Chuck
Nathaniel Smith
2015-12-20 22:30:43 UTC
Permalink
Post by Ralf Gommers
Post by Nathaniel Smith
On Sun, Dec 20, 2015 at 8:23 PM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 11:08 AM, Charles R Harris <
On Sun, Dec 20, 2015 at 10:48 AM, Ralf Gommers <
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor.
If not, I intend to rename my personal account. Note that as AFAICT,
someone has to be the admin for appveyor, and that someone, like everyone
else, can only have one account on appveyor.
Post by Ralf Gommers
Post by Nathaniel Smith
Post by Charles R Harris
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
Post by Ralf Gommers
Post by Nathaniel Smith
Post by Charles R Harris
I get
AppVeyor user with specified email already exists.
This seems to have been the case since at least mid summer. When did
you register the accounts?
Post by Ralf Gommers
Post by Nathaniel Smith
Post by Charles R Harris
Did you use different email addresses?
No, it looks like you can sign in with your Github login, and with
email + password. Those can be different.
Post by Ralf Gommers
Post by Nathaniel Smith
I wonder if there's a better way to organize these kinds of things in
general? It's probably not a big deal, but it can eventually make a mess
sometimes if there's only one person who has access to some piece of
critical infrastructure, and then years later they aren't available at some
point or no one knows who to ask. If we had the steering council mailing
list set up we could use that for the mailing address, but of course atm we
don't. Or we could make a scratch email account somewhere
(numpy-***@gmail) and pass around the login credentials. Or ask Leah
at numfocus to make an account and then add us as admins. Or maybe this is
overthinking it and we should just use some hack and move on :-)
Post by Ralf Gommers
I like the mailing list idea. Why not set up the steering council list
now? It's not like that's a lot of work.

The work is in convincing the one person (that I know about) who has access
to the appropriate permissions to pay attention to my email... I've made
several attempts at getting this set up with no effect so far :-/ But yeah,
it does need to be done in any case so I'll try again.

-n
Charles R Harris
2015-12-20 23:22:12 UTC
Permalink
<snip>
Post by Nathaniel Smith
The work is in convincing the one person (that I know about) who has
access to the appropriate permissions to pay attention to my email... I've
made several attempts at getting this set up with no effect so far :-/ But
yeah, it does need to be done in any case so I'll try again.

I tried simple and dumb, just enabled the numpy repository from my personal
appveyor account. A test PR shows both travis and appveyor running. Now,
that may be just for my PRs, so can someone else try a test PR and see if
the tests run?

Chuck
Charles R Harris
2015-12-20 23:27:42 UTC
Permalink
Post by Charles R Harris
<snip>
Post by Nathaniel Smith
The work is in convincing the one person (that I know about) who has
access to the appropriate permissions to pay attention to my email... I've
made several attempts at getting this set up with no effect so far :-/ But
yeah, it does need to be done in any case so I'll try again.
I tried simple and dumb, just enabled the numpy repository from my
personal appveyor account. A test PR shows both travis and appveyor
running. Now, that may be just for my PRs, so can someone else try a test
PR and see if the tests run?
PS, you need to base on current master.

Chuck
Charles R Harris
2015-12-21 00:11:10 UTC
Permalink
On Sun, Dec 20, 2015 at 4:22 PM, Charles R Harris <
Post by Charles R Harris
<snip>
Post by Nathaniel Smith
The work is in convincing the one person (that I know about) who has
access to the appropriate permissions to pay attention to my email... I've
made several attempts at getting this set up with no effect so far :-/ But
yeah, it does need to be done in any case so I'll try again.
I tried simple and dumb, just enabled the numpy repository from my
personal appveyor account. A test PR shows both travis and appveyor
running. Now, that may be just for my PRs, so can someone else try a test
PR and see if the tests run?
PS, you need to base on current master.
And added an AppVeyor team to the numpy organization as suggested here
<http://www.appveyor.com/docs/team-setup#github-teams>. Shrug, I don't know
if it makes any difference, but you can add yourself.

Chuck
Nathaniel Smith
2015-12-21 00:48:39 UTC
Permalink
On Sun, Dec 20, 2015 at 4:11 PM, Charles R Harris
Post by Charles R Harris
Post by Charles R Harris
<snip>
The work is in convincing the one person (that I know about) who has access to the appropriate permissions to pay attention to my email... I've made several attempts at getting this set up with no effect so far :-/ But yeah, it does need to be done in any case so I'll try again.
I tried simple and dumb, just enabled the numpy repository from my personal appveyor account. A test PR shows both travis and appveyor running. Now, that may be just for my PRs, so can someone else try a test PR and see if the tests run?
PS, you need to base on current master.
And added an AppVeyor team to the numpy organization as suggested here. Shrug, I don't know if it makes any difference, but you can add yourself.
For those following along at home, the build dashboard appears to be here:
https://ci.appveyor.com/project/charris/numpy

And IIUC, anyone who adds themselves (or asks one of us to add them)
to the AppVeyor team here:

https://github.com/orgs/numpy/teams

should get some sort of permissions to mess with the AppVeyor builds.
Except I did that but it doesn't seem to have done anything. Maybe
AppVeyor will resync with github at some point and it will start doing
something.

Also, am I correct that these are win64 builds only? Anyone know if it
would be easy to add win32?

-n
--
Nathaniel J. Smith -- http://vorpus.org
Charles R Harris
2015-12-21 02:43:09 UTC
Permalink
Post by Nathaniel Smith
On Sun, Dec 20, 2015 at 4:11 PM, Charles R Harris
On Sun, Dec 20, 2015 at 4:27 PM, Charles R Harris <
On Sun, Dec 20, 2015 at 4:22 PM, Charles R Harris <
Post by Charles R Harris
<snip>
Post by Nathaniel Smith
The work is in convincing the one person (that I know about) who has
access to the appropriate permissions to pay attention to my email... I've
made several attempts at getting this set up with no effect so far :-/ But
yeah, it does need to be done in any case so I'll try again.
Post by Charles R Harris
I tried simple and dumb, just enabled the numpy repository from my
personal appveyor account. A test PR shows both travis and appveyor
running. Now, that may be just for my PRs, so can someone else try a test
PR and see if the tests run?
PS, you need to base on current master.
And added an AppVeyor team to the numpy organization as suggested here.
Shrug, I don't know if it makes any difference, but you can add yourself.
https://ci.appveyor.com/project/charris/numpy
And IIUC, anyone who adds themselves (or asks one of us to add them)
https://github.com/orgs/numpy/teams
should get some sort of permissions to mess with the AppVeyor builds.
Except I did that but it doesn't seem to have done anything. Maybe
AppVeyor will resync with github at some point and it will start doing
something.
Also, am I correct that these are win64 builds only? Anyone know if it
would be easy to add win32?
Don't know. I also noticed a bunch of permission errors with temp files.
There are some failing tests that are filtered out with our preliminary
appveyor script.

Nathaniel, if you have an appveyor account that lets you have access to the
numpy repo, could you try enabling it and see what happens? I note the
matplotlib dashboard is on mdboom's account.

Chuck
Nathaniel Smith
2015-12-21 03:11:04 UTC
Permalink
On Sun, Dec 20, 2015 at 6:43 PM, Charles R Harris
[...]
Post by Charles R Harris
Post by Nathaniel Smith
Also, am I correct that these are win64 builds only? Anyone know if it
would be easy to add win32?
Don't know. I also noticed a bunch of permission errors with temp files.
There are some failing tests that are filtered out with our preliminary
appveyor script.
Yeah, looking at the logs for
https://ci.appveyor.com/project/charris/numpy/build/1.0.5/job/9lkl8940dvhrml2v
https://ci.appveyor.com/project/charris/numpy/build/1.0.5/job/awgp7fnne15jwb21
there appears to be some configuration weirdness that makes temp files
unwriteable so all the tests that use those fail, plus some mysterious
issue with distutils.msvc9compiler, plus what's probably a genuine
error in mtrand.pyx where it is expecting 'long' to be 64 bits (which
it is on every 64-bit platform we support *except* for win64), plus
what's probably a genuine problem with test_diophantine_fuzz (py3 only
-- maybe some PyInt/PyLong transition issue?).
Post by Charles R Harris
Nathaniel, if you have an appveyor account that lets you have access to the
numpy repo, could you try enabling it and see what happens? I note the
matplotlib dashboard is on mdboom's account.
I have the option of clicking "add a project" and then selecting
github / numpy / numpy from the list, but AFAICT this seems to create
a second independent copy of the project in appveyor's system, which
I'm pretty sure is not what we want?

The interface is extraordinarily confusing. They really need to hire
an editor for their docs / messages :-(

(It's also astonishingly slow -- like 30 minutes per build, and builds
run in serial...)

-n
--
Nathaniel J. Smith -- http://vorpus.org
Charles R Harris
2015-12-21 03:34:12 UTC
Permalink
Post by Nathaniel Smith
On Sun, Dec 20, 2015 at 6:43 PM, Charles R Harris
[...]
Post by Charles R Harris
Post by Nathaniel Smith
Also, am I correct that these are win64 builds only? Anyone know if it
would be easy to add win32?
Don't know. I also noticed a bunch of permission errors with temp files.
There are some failing tests that are filtered out with our preliminary
appveyor script.
Yeah, looking at the logs for
https://ci.appveyor.com/project/charris/numpy/build/1.0.5/job/9lkl8940dvhrml2v
https://ci.appveyor.com/project/charris/numpy/build/1.0.5/job/awgp7fnne15jwb21
there appears to be some configuration weirdness that makes temp files
unwriteable so all the tests that use those fail, plus some mysterious
issue with distutils.msvc9compiler, plus what's probably a genuine
error in mtrand.pyx where it is expecting 'long' to be 64 bits (which
it is on every 64-bit platform we support *except* for win64), plus
what's probably a genuine problem with test_diophantine_fuzz (py3 only
-- maybe some PyInt/PyLong transition issue?).
Post by Charles R Harris
Nathaniel, if you have an appveyor account that lets you have access to
the
Post by Charles R Harris
numpy repo, could you try enabling it and see what happens? I note the
matplotlib dashboard is on mdboom's account.
I have the option of clicking "add a project" and then selecting
github / numpy / numpy from the list, but AFAICT this seems to create
a second independent copy of the project in appveyor's system, which
I'm pretty sure is not what we want?
Do you mean that we ended up with double the appveyor testing, one for each
of our accounts? The process you describe is what I did.
Post by Nathaniel Smith
The interface is extraordinarily confusing. They really need to hire
an editor for their docs / messages :-(
Yes, they do.
Post by Nathaniel Smith
(It's also astonishingly slow -- like 30 minutes per build, and builds
run in serial...)
There is that.

Chuck
Nathaniel Smith
2015-12-21 05:01:34 UTC
Permalink
On Sun, Dec 20, 2015 at 7:34 PM, Charles R Harris
Post by Charles R Harris
Post by Nathaniel Smith
On Sun, Dec 20, 2015 at 6:43 PM, Charles R Harris
[...]
Post by Charles R Harris
Post by Nathaniel Smith
Post by Charles R Harris
Nathaniel, if you have an appveyor account that lets you have access to the
numpy repo, could you try enabling it and see what happens? I note the
matplotlib dashboard is on mdboom's account.
I have the option of clicking "add a project" and then selecting
github / numpy / numpy from the list, but AFAICT this seems to create
a second independent copy of the project in appveyor's system, which
I'm pretty sure is not what we want?
Do you mean that we ended up with double the appveyor testing, one for each
of our accounts? The process you describe is what I did.
Yes, exactly. Pretty useless. I let it run a few builds, and then
deleted it again...

-n
--
Nathaniel J. Smith -- http://vorpus.org
Charles R Harris
2015-12-21 03:45:51 UTC
Permalink
Post by Nathaniel Smith
On Sun, Dec 20, 2015 at 6:43 PM, Charles R Harris
[...]
Post by Charles R Harris
Post by Nathaniel Smith
Also, am I correct that these are win64 builds only? Anyone know if it
would be easy to add win32?
Don't know. I also noticed a bunch of permission errors with temp files.
There are some failing tests that are filtered out with our preliminary
appveyor script.
Yeah, looking at the logs for
https://ci.appveyor.com/project/charris/numpy/build/1.0.5/job/9lkl8940dvhrml2v
https://ci.appveyor.com/project/charris/numpy/build/1.0.5/job/awgp7fnne15jwb21
there appears to be some configuration weirdness that makes temp files
unwriteable so all the tests that use those fail, plus some mysterious
issue with distutils.msvc9compiler, plus what's probably a genuine
error in mtrand.pyx where it is expecting 'long' to be 64 bits (which
it is on every 64-bit platform we support *except* for win64), plus
what's probably a genuine problem with test_diophantine_fuzz (py3 only
-- maybe some PyInt/PyLong transition issue?).
Post by Charles R Harris
Nathaniel, if you have an appveyor account that lets you have access to
the
Post by Charles R Harris
numpy repo, could you try enabling it and see what happens? I note the
matplotlib dashboard is on mdboom's account.
I have the option of clicking "add a project" and then selecting
github / numpy / numpy from the list, but AFAICT this seems to create
a second independent copy of the project in appveyor's system, which
I'm pretty sure is not what we want?
The interface is extraordinarily confusing. They really need to hire
an editor for their docs / messages :-(
(It's also astonishingly slow -- like 30 minutes per build, and builds
run in serial...)
The Python 3 build runs much faster than the Python 2. You can close and
reopen my testing PR to check what happens if you enable the numpy project.

Chuck
Ian Henriksen
2015-12-21 18:47:49 UTC
Permalink
Post by Charles R Harris
The Python 3 build runs much faster than the Python 2. You can close and
Post by Charles R Harris
reopen my testing PR to check what happens if you enable the numpy project.
I'm not sure why this is the case. MSVC 2015 is generally better about a
lot of things, but it's
surprising that the speed difference is so large.
Best,
-Ian
Ian Henriksen
2015-12-21 18:42:19 UTC
Permalink
Post by Nathaniel Smith
Also, am I correct that these are win64 builds only? Anyone know if it
would be easy to add win32?
It'd be really easy to add 32 bit builds. The main reason I didn't was
because appveyor only
gives one concurrent build job for free, and I didn't want to slow things
down too much. I can get
a PR up for 32 bit builds too if you'd like.

Some background: I based the initial setup off of the dynd-python appveyor
setup
(https://github.com/libdynd/dynd-python/blob/master/appveyor.yml) where we
do one 32 and one
64 bit build. For fancier selection of Python installation, there's a demo
at
https://github.com/ogrisel/python-appveyor-demo that looks promising as
well. I avoided that
initially because it's a lot more complex than just a single appveyor.yml
file.

Best,
-Ian
Ralf Gommers
2015-12-22 07:14:03 UTC
Permalink
On Mon, Dec 21, 2015 at 7:42 PM, Ian Henriksen <
Post by Nathaniel Smith
Also, am I correct that these are win64 builds only? Anyone know if it
Post by Nathaniel Smith
would be easy to add win32?
It'd be really easy to add 32 bit builds. The main reason I didn't was
because appveyor only
gives one concurrent build job for free, and I didn't want to slow things
down too much. I can get
a PR up for 32 bit builds too if you'd like.
That would be quite useful I think. 32/64-bit issues are mostly orthogonal
to py2/py3 ones, so may only a 32-bit Python 3.5 build to keep things fast?

Ralf <https://mail.scipy.org/mailman/listinfo/numpy-discussion>
Ian Henriksen
2015-12-22 20:25:47 UTC
Permalink
Post by Ralf Gommers
That would be quite useful I think. 32/64-bit issues are mostly orthogonal
to py2/py3 ones, so may only a 32-bit Python 3.5 build to keep things fast?
Done in https://github.com/numpy/numpy/pull/6874.
Hope this helps,
-Ian
Ralf Gommers
2015-12-22 20:56:34 UTC
Permalink
On Tue, Dec 22, 2015 at 9:25 PM, Ian Henriksen <
Post by Ian Henriksen
Post by Ralf Gommers
That would be quite useful I think. 32/64-bit issues are mostly
orthogonal to py2/py3 ones, so may only a 32-bit Python 3.5 build to keep
things fast?
Done in https://github.com/numpy/numpy/pull/6874.
Hope this helps,
Great, thanks again Ian!

Ralf

Charles R Harris
2015-12-20 20:48:46 UTC
Permalink
On Sun, Dec 20, 2015 at 8:23 PM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 11:08 AM, Charles R Harris <
Post by Charles R Harris
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor. If
not, I intend to rename my personal account. Note that as AFAICT, someone
has to be the admin for appveyor, and that someone, like everyone else, can
only have one account on appveyor.
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
I get
AppVeyor user with specified email already exists.
This seems to have been the case since at least mid summer. When did you
register the accounts?
Did you use different email addresses?
No, it looks like you can sign in with your Github login, and with email +
password. Those can be different.
Doesn't work. Signing in with github is me, not numpy. I do get the option
of adding numpy/numpy, but that isn't the same.

Maybe cleaning out all those darn cookies will help.

Chuck
Charles R Harris
2015-12-21 02:30:53 UTC
Permalink
On Sun, Dec 20, 2015 at 6:31 PM, Charles R Harris <
Post by Charles R Harris
Hi All,
Just checking if someone has already registered numpy on appveyor. If
not, I intend to rename my personal account. Note that as AFAICT, someone
has to be the admin for appveyor, and that someone, like everyone else, can
only have one account on appveyor.
Don't think so, unless they changed something very recently. I have
already registered 2 accounts (my own, and pywavelets).
I created my appveyor account with the github button, that may be the
problem. Ralf, did you use that button, or did you create all your accounts
with the name/email/password method?

Chuck
Loading...